![]() Pins 7-14 (Data Pins/D0……D7): These pins are used to send data main to the display.Pin 6 (Enable(E)): This pin should be held high to execute Read/Writing process, and it is connected to the microcontroller unit & constantly held high.Pin5 (Read/Write(RW)): This pin toggles the display among the read or writes operation, and it is connected to a microcontroller unit pin to get either 0 or 1 (0 = Write Operation, and 1 = Read Operation). ![]() Pin4 (RS/Register Select/Control Pin): This pin toggles among command or data register, used to connect a microcontroller unit pin and obtains either 0 or 1(0 = data mode, and 1 = command mode).Pin3 (V0/VEE/Control Pin): This pin regulates the difference of the display, used to connect a changeable POT that can supply 0 to 5V.Pin2 (VCC/VDD/Source Pin): This is the voltage supply pin of the display, used to connect the supply pin of the power source.Pin1 (VSS/Ground): This is a GND pin of display, used to connect the GND terminal of the microcontroller unit or power source.Backlight Options: Available in Green and Blue.Compatibility: Supports both 8-bit and 4-bit modes.Display Type: Alphanumeric (can display letters, numbers, and special characters).Current Consumption (without backlight): 1mA.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |